Keene Retail Ltd

KEENE CAT5BLASTER QC WALLPLATE PAIR

Brand: Keene Electronics

[C5QCWP] £ 89.99 (£ 76.59 ex VAT)

C5QCWP

Overview
The Cat5Blaster QC Wallplate is an easy to install system that enables high quality video and audio to be distributed over long distances using inexpensive network cable (CAT5 unshielded twisted pair). It can carry two video channels plus two audio channels and may be also used for s-video with the supplied adaptor cable. The C5QCWP is supplied in pairs, one unit to be used as the transmitter; the other as the receiver. There is no difference between the supplied units; your connections will designate which item performs which function. The C5QCWP units do not require any external power to function.

* Has two independent video channels can be configured for s-video or 2 x composite video

* Can be configured for analogue stereo or 2 x mono audio

* Can send high quality images up to 100 metres

* Consists of a pair of units for 1:1 distribution

Connection
Note: The Cat5 cable used for connecting the C5QCWP must be used solely for that purpose. All of the connectors within the Cat5 cable are used and it is important that it is not accidentally connected to any other computer or telephone equipment.

Cabling
Run the Cat5 cable from the location of the transmitter to the location of the receiver. The PCB on the rear of the unit allows for either RJ45 style plug or punch down IDC connection (not both!). Use standard Cat5 cabling practice (EIA568B) throughout and do not use cross-over cables.

If desired, either of the composite inputs may be used for digital audio.

Note that no conversion is performed within the unit so if s-video is connected to the transmitter end input you will get s-video at the receiver.

Maximum Cat5 cable lengths
The maximum recommended distance from the transmitter to the receiver is approximately 100m. For lengths in excess of this distance we recommend using the Cat5Blaster powered system. (The actual distance may vary slightly depending upon which video mode is being used).

Equipment list
2 x Cat5Blaster QC wallplate modules;
2 x KA188 s-video adaptor cables

Have a look at the instruction manual here (Acrobat pdf file)

KEENE CAT5BLASTER QC TRANSMITTER & RECEIVER

	[C5QC] £ 89.99 (£ 76.59 ex VAT)
	If you don't need the multiple locat more info

KEENE CAT5BLASTER QC ACTIVE TRANSMITTER & RECEIVER

	[C5QCA] £ 99.99 (£ 85.10 ex VAT)
	Provides quick and easy 1:1 distribu more info

CAT5 STEREO AUDIO WALL PLATE SYSTEM

	[C5QCAP] £ 49.99 (£ 42.54 ex VAT)
	This pair of wall plates provides a more info

KEENE CAT5BLASTER QUICK CONNECT WALL PLATE

	[C5QCCP] £ 149.99 (£ 127.65 ex VAT)
	A really easy way to send high quali more info

KEENE CAT5BLASTER TRANSMITTER & MASTER RECEIVER

	[C5B] £ 259.99 (£ 221.27 ex VAT)
	Cat5Blaster Video Distribution Syst more info

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question

Previous Questions

1 Simon on 13 Jul 2010 asked :
"I bought a pair of these 6 months ago and the results are much better than my previous powered Bluedelta set up. I now want to replace the Bluedelta equipment and wondered if these wall plates can be daisy chained? i.e. I want one of these wall plates to act as the master and service two separate wall plates which will act as the receiver. This means that I will punch down two sets of CAT6 cable to the back of the master. Will this faithfully reproduce the signal to both receivers?"

Keene replied: The audio would work OK but the because the video is a 75R feed you would loose half your signal if you split the output to 2 receivers. Same problem when passively splitting any video output. Results in a dark and slightly jumpy picture. It would be better to use a video distribution amp at the source and send down 2 WALLPLATE pairs

2 Simon on 09 Dec 2009 asked :
"This looks a very interesting product! Can I connect two different video sources to each end of the link? I want to connect a DVD player as the source upstairs and Sky downstairs. It means the TV upstairs can view Sky and the TV downstairs can watch the upstairs DVD. Of course it will have to be mono audio."

Keene replied: Yes you can do this.

If you feel something is not correct with this product please contact us using the same link

Tell a friend?

Want to tell a friend about this page?

Tell a friend