Ask a Question?
If you would like to ask us a question about this product, please feel free to click here to Ask a Question
Previous Questions
1 Paul on 03 Dec 2009 asked :
"
Do you have a version that will run over single CAT5e. The HDEX344 is not valid?"
Keene replied: Yes we do weblink
http://www.keene.co.uk/electronics/multi.php?mycode=hdex344
2 Jeff E on 16 Apr 2009 asked :
"
For forty quid you get both the transmitter, receiver and psu's for both? Thanks."
Keene replied: Yes you do...
3 Stuart D on 12 Apr 2009 asked :
"
Does this system require the recievers & senders to be directly connected end to end, or can they be connected/integrated via a home network, router/switch etc?"
Keene replied: They have to be connected directly.
It will not work over a home network.
4 Paul on 08 Mar 2009 asked :
"
Does the receiver need power, if yes is there a version that send power to receiver so this can be used on a wall mount tv without the need for a plug in power adaptor"
Keene replied: The receiver does need power and we have no passive version.
5 Rory on 02 Mar 2009 asked :
"Are the boxes wall-mountable. We are looking to mount an lcd on the wall and keep all of the boxes and cables out of sight. "
Keene replied: No these are not wall mountable.
6 Dave L on 14 Jan 2009 asked :
" - Will this work with the mains powered network extenders? I.e. Can the HDMI signal go from sky -> HDMI Extender -> Cat5E -> Mains Ethernet -> Mains Wiring -> Mains Ethernet -> HDMI extender -> TV?
Hope that makes sense!"
Keene replied: It will not work in this scenario.
7 Steve on 12 Dec 2008 asked :
"
Does it require you to have to run two cat 5 cab,es to work or will one work ?"
Keene replied: You do need two cat5 cables.
8 Paul K on 26 Nov 2008 asked :
"
Does the product also carry the HDMI v1.3 audio signal to the receiver?"
Keene replied: Yes it does
9 Chris P on 03 Nov 2008 asked :
""HDMI OVER CAT5E /6 EXTENDER SYSTEM 30M 1080P" Does it require power to either the transmitter or reciever?"
Keene replied: Both.
10 Martin F on 23 Oct 2008 asked :
""HDMI OVER CAT5E /6 EXTENDER SYSTEM 30M 1080P" I am looking to send a HDMI signal to 2 remote displays. Can these units be configured with one transmitter and 2 receivers, or will some sort of distribution amplifier be required. (small budget!)"
Keene replied: You would need some sort of distribution/splitter amp to do this. We do list several on our site.
11 Jon H on 20 Oct 2008 asked :
"Could the signal be sent wirelessly using these adapters?"
Keene replied: No. It uses Cat5 or Cat6 cabling.
12 Martin W on 16 Oct 2008 asked :
""HDMI OVER CAT5E /6 EXTENDER SYSTEM 30M 1080P"
I want to send a second hdmi cable to the bedroom from my sky hd box. The run is about 20 metres. Can you quote for the equipment I will need to acheive this. Thanks"
Keene replied: It is HDCP compliant otherwise it would not work.
It should be fine with a PS3
13 Derek W on 01 Oct 2008 asked :
""HDMI OVER CAT5E /6 EXTENDER SYSTEM 30M 1080P"
Will this categorically send an unaltered full 1080p signal without loss of quality.
I only ask because I previously purchased a 15M HDMI cable which the manufacturer assured me was 1080p compatible, but to my cost having sunk it in a wall, wasn't"
Keene replied: We did test one of these and it did send 1080p over 30m without loss.
Anything over 10m on a cable can be a problem with 1080p
It varies across the board some screens are fine at this distance some are not.
If you feel something is not correct with this product please contact us using the same link
Tell a friend?
Want to tell a friend about this page?
AV Products & Accessories - making AV happen 
)
