Our Products
KEENE SCART COMMANDER (SINGLE UNIT) PROMO PRICE
Brand: Keene Electronics
[KSC] £ 99.99 (£ 85.10 ex VAT)
Add to order



The Keene Scart Switch Box is a high quality audio/video switcher designed to allow the connection of multiple sources to one display. Particular attention has been given to the signal processing to ensure that all video formats and picture information are preserved. The Scart Commander is capable of switching component video, s-video, RGB (in all its forms including RGBs, RGsB, RGBS or RGBHV) and composite video. Because each video channel is correctly routed it can even be used to switch digital audio (with the correctly configured cable). Each input can be selected manually or automatically via auto signal detect. A single switchbox can be used to switch four inputs to one output, or two units may be used together in a Master/Slave arrangement providing switching for seven units to one output. It utilises very high quality high bandwidth ICs throughout to ensure that there is no discernable signal degradation.


Key Features;

* Four input to two output switching (single unit)

* Seven input to one output switching (two units used in master/slave combination)

* The Slave unit can be located up to 10m from the Master

* Each input will auto-switch upon signal detection and fall back to the last selected output when the input signal is no longer present.

* The unit can be located out of sight - its ability to automatically sense and switch on any signal type means it can be positioned at the back of your equipment completely out of sight allowing you to watch any device simply by switching it on.


Switching comprises of;

Four analogue video channels (which may be used for RGB, Component video, Progressive Component, S video or composite video)

2 digital channels (TTL) which can be used for Separate sync, mixed sync or digital audio

2 control channels for AV system control (pin 8 for AV active and widescreen / normal, Pin 16 for RGB or not RGB selection)

2 analogue audio channels for Left and Right stereo audio pins

Two buffered outputs available, one on a scart socket and one on an SVGA connector (control signals are not present on SVGA style socket). This allows the unit to switch RGBHV signals from say a PC.

The three RCA phono sockets adjacent to the scart output provide an additional buffered output for easy hook up to an AV amplifier or video sender. Similarly the 15 pin HD socket provides another buffered video output that may be used to connect to say a Plasma display or projector.

Full remote control. IR remote control, a Pronto CCF file is also available for free download.

Manual Push button control

Visual LED indication of the selected output

Programmable default input that is selected automatically on power up.

Separate mains adapter for improved mains isolation

Solid metal case for enhanced screening.



Need two units? Buy the KSCT and save money!

Do you need a spare mains adaptor? It's a KT5

Download a "pronto" style CCF file here (right click "save as")


TECHNICAL SPECIFICATION

Power requirements
By external supply to DC input socket, (2.1mm centre positive), 12-18v DC @ 200mA or greater. Consumption 60mA standby 100mA video signal present

Video
Video bandwidth 50MHz at 3db Level - Composite / Luminance 1v pp, Chrominance 0.3v peak to peak.
Distortion components < -50db up to 10Mhz
Open circuit voltage gain is X2 (unity gain when correctly terminated)
Back terminated series 75R outputs for reflection free performance
Slew rate up to 500v/uS

Audio
buffered audio outputs
Distortion <0.1%
Bandwidth 20Hz 30KHz
Output impedance, <1K ohms each output
Input impedance >10K ohms
Unity gain

Channels
2 audio channels
4 video channels
2 digital channels
2 control channels (pin 8 & 16)

Have a look at the instruction manual here (Acrobat pdf file)

Have a look at the instruction manual in French here (Acrobat pdf file)

Do you need any more cables for your set-up? Why not take a look at our 'Leads and Cables' section, we might just have what you are looking for!

KEENE SCART COMMANDER EURO VERSION (SINGLE UNIT)

please click to see larger image [KSCE] £ 129.99
(£ 110.63 ex VAT)

*** This model comes with a two pin more info
Add to order
there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question


Previous Questions

1 Alan C on 05 Jul 2008 asked  :
"\"KEENE SCART COMMANDER (SINGLE UNIT) PROMO PRICE\" Does the unit send the switching signal to the TV to set the correct picture format for the selected source - 4:3 or 16:9?"

Keene replied: It does do wide screen switching is the signal is present.


If you feel something is not correct with this product please contact us using the same link

Tell a friend?

Want to tell a friend about this page?

Tell a friend

please click to see larger image
Mega Deal
CMT-1H RF TO COMPOSITE DEMODULATOR
please click to see larger image [CMT1H] £ 89.00
(£ 75.74 ex VAT)
Brand: Cyp Uk
Bookmark and Share
Keene electronics catalogue
Keene HDMI catalogue
Would you like to sign up for our newsletter?
*  Your email address:
*  Enter the security code shown: