New from Keene's own workshops, the SyncBlaster Black Box is the ultimate RGB problem solver, designed to cater for the different video input requirements of RGB monitors, video projectors and plasma screens etc and in particular the way in which the synchronising information is handled. The SyncBlaster Black Box can:
Add sync to the green signal
Remove sync from the green signal
Output separate H & V sync
Output combined H+V sync
Output composite sync on pin19
Remove composite sync from pin 19
Enable composite video output
Disable composite video output
Choose between negative going or positive going sync level outputs
Be used as a diagnostic tool with LED indication of signal types Connections for both input and output are via SCART sockets. Usually the input would be a SCART to SCART connection from say a DVD player or digi-box, and the output would typically be to a Plasma screen, projector or monitor. With this in mind you can buy the Syncblaster Black Box with a pre-configured output cable (2m length) as follows:
BULK PRICING (50+) and OEM AVAILABLE on this product
If using a PC style monitor check that it is not designed solely for computer use i.e. the monitor must support a horizontal scan rate of 15.625KHz. Most projectors, plasma and LCD panels will do this whereas most standard CRT type monitors will not. Also, some screens may support this frequency only via the BNC/Phono connections whilst supporting only higher frequencies through the 15 pin HD plug.
Have a look at the full intstruction sheet here (Acrobat pdf file)
AV Products & Accessories - making AV happen 
)
