KEENE IR LOW POWER WAND

	[IRLPW] £ 5.99 (£ 5.10 ex VAT)
	The IR Low Power wand is for use wit more info

KEENE IR HIGH POWER WAND

	[IRHPW] £ 7.99 (£ 6.80 ex VAT)
	The IR High Power wand is for use wi more info

KEENE IR SIDE FIRING WAND

	[IRSFW] £ 7.99 (£ 6.80 ex VAT)
	The IR side firing wand is for use w more info

IR DUAL OUTPUT BLINKING WANDS

	[IRDW] £ 9.99 (£ 8.50 ex VAT)
	The IR Dual blinking wand is for use more info

Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to Ask a Question

Previous Questions

1 Paul on 05 Nov 2009 asked  :
"Hi, Can you tell me if these can be extended? If they can, how long can they be extended by? Cheers"

Keene replied: We offer a range of extention cables from 3m, 5m and 10m, the IR UNIVERSAL WAND can be extended but we have found 10m is pretty much the maximum, Thanks

2 Drew M on 25 Aug 2009 asked  :
" If using 4 of these to control 4 different devices which are all 10 meters away in the same room/cupboard will I need to run four separate extention cables or is there a device/connector that can join the 4 connections at one end and then separate them out at the other end. Thus allowing me to run only one cabe between the amp and the devices being controlled ie a cat 5 cable."

Keene replied: Not really. the best solution would be to situate the amp in the cupboard and run an extension cable from the receiver to the amp. You would use a KLD4010 or a cat5 cable with the KA175 adaptor.

3 Martin C on 02 Jul 2009 asked  :
" If plugged into the high power output will it transmit at high power or still low power?"

Keene replied: Still low power

4 Neil L on 15 Oct 2008 asked  :
" "IR UNIVERSAL WAND" Hi, How long is the cable? N"

Keene replied: It is 1.2m.

If you feel something is not correct with this product please contact us using the same link

Tell a friend?

Want to tell a friend about this page?

Tell a friend