Optional Accessories
INPUT COMPONENTS
Standard IR Receiver 36 - 40kHz suitable for most domestic equipment.
IRSR
Wide Band IR Receiver, 20- 120kHz for more esoteric equipment.
IRWBR
Standard IR Receiver wall plate. 36-40kHz suitable for most domestic equipment, built into a single gang faceplate
IRSP
Wideband IR Receiver wall plate. 20-120kHz suitable for most esoteric equipment, built into a single gang faceplate
IRSPW
Panel mount IR receiver. With a 30mm visible diameter they can be built into AV cabinets, studded walls and ceilings. Available in four finishes:
IRPMR (black)
IRPMRW (white)
IRPMRB (brass)
IRPMRC (chrome)
IR Link Cable that allows you to take the IR wand output from products such as the the IR Anywhere, C5QCA, IRBKIT, Powermid etc, and feed it directly into the IR receiver input on another Keene IR product. Length: 1.5m (3.5mm - 3.5mm tip & body only)
KLDE6M
Wand IR lead To feed the wand output from other IR extender equipment directly to the IR Commander wand input (2.5mm stereo jack plug to 3.5mm stereo jack plug 2.0m long). KLDE10M
Input splitter 1 x 3.5mm stereo jack plug to 2 x 3.5mm stereo jack sockets adaptor. Allows the IR Distribution Amp input to be fed by both a cabled feed (from say a Powermid RF receiver) and an in-room
IR receiver. KA109
OUTPUT COMPONENTS
Universal Wand. The Universal wand can either be equipment fascia or shelf mounted.
IRUW
Low Power Wand. Can be attached directly to the equipment fascia or will work up to 4 metres away. Even when attached directly the equipment will still respond to external IR signals. Only to be used in the IR Distribution Amp low power output sockets.
IRLPW
Side Firing Wand. A short range emitter for direct attachment to the equipment fascia. IRSFW
Dual Blinking Wands. The single jack plug drives two IR emitter wands. The emitters are extremely tiny (just 9mm across) and are supplied with double sided adhesive pads to affix directly to the equipment fascia. The emitters actually flash red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly. IRDW
EXTENSION
Extension leads, 3.5mm stereo jack plug to 3.5mm stereo socket to be used on input or output as required. We've tested the input up to 10m and the output to 20m.
3m extension KLD40
5m extension KLD405
10m extension KLD4010
You can extend the input much further by using CAT5 cable and a pair of these adaptors