The IR Commander Matrix can be used as a stand-alone hard-wired IR distribution system and configured and operated with no requirement for network operation.
An IR signal can be received either by the on-board IR receiver, or by an external receiver plugged into one of the input sockets or as data via the network connection. The signal once received is then transmitted to an IR wand connected to one or more of the outputs. The input routing switches determine which output (IR OUT 1,2,3 or4) receives the signal from that numbered input. The dip switch in the down position makes that output active. Any or all outputs may be active for each input.
To use the more advance features please download the software from the link opposite and then follow the instructions in the software control section.