These make extending the distance between an IRBKIT or an IR Commander Matrix and the IR receiver (or IR emitter wand) very easy. We recommend that if you want to extend more than about twelve metres simply run a length of networking cable (Cat5e or Cat6 works best) and use our KA175 adapters to connect it all together.
Supplied as a pack of two adapters to give you one for each end of your network cable. One adapter has a jack socket on the end to connect to the captive cable on an IR receiver, and the other has a jack plug to go into the IRBKIT or IR Commander Matrix.
These will work wih CAT5E cable up to approx 100m. If you need to go further then consider the KA175XLE which uses line drivers to extend this up to 300m.
Length: roughly 25cm per cable
Other really handy extension cables
3 metre jack extension cable
5 metre jack extension cable
10 metre jack extension cable
IR link cable
3.5mm jack 'special' link cable to enable a Powermid IR extender or similar device to be linked into an IRBKIT or IR Commander Matrix. * Please note that this is not wired as a standard jack cable *
For our range of networking cables please click here