Keene In-wall Digital Slave Amplifier (grey) Excl. PSU
Out of stock
KLAB20DS In-Wall Digital Slave Amplifier (without power supply unit)
The Keene KLAB20DS is a 20W per channel stereo slave amplifier built into a UK two gang faceplate. It is designed to be a fit and forget solution to powering additional and remote pairs of loudspeakers. Once installed it will automatically switch switch on whenever audio is detected and switch back to a low power standby mode when no audio signal is present. Ideal for use with audio streaming products that have a non-amplified line output such as Sonos, Squeezebox etc.
It can also be directly linked to the output of a KLAB20D (a special adaptor cable is available for the 3 pin header on the KLAB20D and the KLAB20DS connections, please also order code 2 x KLAB20LC if required)
20W RMS per channel
Digital Class D design for high efficiency with minimal heat produced
Automatic standby function
LED's for status and confirmation
Rear Balance & Gain adjustment
Flush mount or surface mount (25mm depth, or 35mm for dry-lining)
Very low standby power consumption (0.3W)
What's in the box?
K-Lab Digital Slave amplifier
2 phono socket to open end input cable
You can also purchase the K-LAB20 Digital Slave amplifier with a power supply.
KLABKITDS Digital Slave amplifier with power supply.
To link the Digital Slave amplifier directly to the K-LAB Digital in-wall amplifier you can use a pair of KLAB20LC adaptors
Using the K-LAB Digital Slave amplifier outside the UK
We can also offer these options with a Euro two pin power supply. Please contact us for more details.
KLABPSU Power supply
KLAB20DSFP Replacement front panel.
MPATLD Flush mount metal pattress, 25mm deep.
MPAT35D Flush mount metal pattress, 35mm deep.
PAT3D Surface mount white plastic pattress, 30mm deep.
|Product Brand||Keene Electronics|
|Info||20W RMS per channel|
|•||Automatic standby function|
|•||LED's for status and confirmation|
|•||Very low standby power consumption (0.3W)|
Write Your Own Review
1) Data Sheet (PDF)