HDANYWHERE MHUB 2K (4x4) HDMI over CAT Matrix with IR Control
The ever-popular mHub 2K 4x4 is a 4x4 HDMI over Cat 5e / 6 matrix which sends Full HD 1080p up to 50m / 164 ft and has four HDMI loop outs and two-way IR support. Sold as a complete package inc. IR and display receivers.Note: This version of mHub comes without uControl support, this is exclusive to the new MHUB range.
MHUB 2K (4x4) supports Full HD 1080p resolutions up to 50m / 164 ft, over a single Cat 6 cable from four source devices to four displays with two-way IR and ARC (on RX).
Four additional HDMI outputs can be used for integrating AVRs or mirrored displays. Control is delivered through TCP/IP, RS232 or direct IR with a range of third party control drivers available to download free of charge. MHUB 2K (4x4) supports all stereo and multichannel audio formats up to and including Dolby-Atmos and DTS:X. Setup is quick and simple with MHUB 2K (4x4).
Every box includes one matrix with 12V PSU and rack mounting ears, four receivers with 5V power adaptors, IR kit, a small matrix remote and four USB to 5V power leads.
Since being released in the summer of 2014, MHUB 2K (4x4) has been praised for its speed of switching. Stephen Withers, Assistant Editor of AVForums, found that “the switching was seamless and there was no degradation of signal, with the system performing exactly as advertised.” It was so popular, HDANYWHERE bought it back for a limited time only!
Control is delivered through TCP/IP, RS232 or direct IR, meaning MHUB can be easily integrated with third party control systems. The EDID management tools enable the highest resolution audio to be passed to an AVR via the mirrored HDMI outputs, whilst video is sent to the display location. MHUB 2K (4x4) has discretely routed IR passback, discrete matrix control via IR and forwards IR routed to displays. For a list of all supported video and audio formats, please feel free to get in touch .
1) User Manual (PDF)