Do you have more than one SKYHD receiver? Do you wish you could control them individually using the original remotes? We've been listening!
The Keene IR4SKY is a sophisticated IR Control Distribution device, designed for use with UK SKYHD satellite decoders. It is particularly suited to installations of multiple SKYHD receivers as it is able to overcome the problem of receivers of the same type all responding to the same IR command. The IR4SKY is able to match the signal from a particular SKYHD IR remote control and route it a specific receiver output as required.
It achieves this by making use of a facility already built-in to the SKYHD remote control. The supplied remote control for each SKYHD receiver can be set to one of four different modes, (0,1,2 & 3). The IR4SKY is able to distinguish between the IR signals from these different modes, and use that information to route the command to the required output. Before the IR signal is output it is automatically translated back into the correct mode (0) to operate the receiver. IR signals for other non-SKYHD AV devices such as DVD players etc are all routed through to output 0.
* Individually control up to four SkyHD Satellite receivers in the same location
* Prevents all receivers responding at the same time
* Use the original IR Remote Controls
* Also acts as an IR sender for your other AV equipment in the same cabinet
* Easy to set-up - no programming skills needed
1 x IR4SKY Intelligent IR Distribution Amplifier
1 x KT9 UK power supply 7.5v DC 250mA
1 x IRFMR Fascia mount IR Receiver
3 x IRBW1 Close range IR Emitters
3 x IRSHIELD adhesive IR covers
1 x Instruction Sheet
Optional extras to consider
KA175XLE if you need to connect to a source some distance away
IRBW1 IR Emitter Wand, 3 are included but the IR4SKY can support up to four
IRSHIELD if you add another IRUW
Have a look at the instruction sheet
|By Type||IR Distribution|
|Product Range||Keene IR|