IR control problems are becoming more common as it is often desirable to hide AV equipment away in cabinets or other rooms, often a distance from the TV or projector. The IRBKIT system makes it easy to relay those important IR signals back to where they are needed.
The IRBKIT system is designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.So what do I need?
In a basic set-up you will need an IRBKIT IR distribution amplifier, an IR receiver to point the remote control at, and an IR emitter 'wand' for each device which you would like to control. How do I pick the components I need?
Dead easy, we've put together some kits to help you! IRBKIT WITH STANDARD IR RECEIVER
This page that you are on now shows our IRBKIT IR distribution amplfier with our Standard IR receiver. This is ideal if you want to hide the receiver away out of sight under the screen, under the cabinet, on a bookshelf, basically anywhere where it's front still has a clear line of sight with the remote control (it's very important to have a clear line of sight!). The IR receiver is a neat and tidy design measuring only 54mm long x 37mm wide x 9mm deep and so can fitted into small spaces.
The IR receiver cable is about 1.2 metres long and so fine for most local installations. This cable can be easily extended if needed with our range of extension cables, please follow the 'cables and adaptors' link below for our options.
* Please note that if you require more than one IR receiver input then we recommend the IR Pro Kit 4
or the IR CommanderKit Contents
1 x IRBKIT IR distribution amplifier
1 x PSU with 3 pin UK plug
1 x Standard IR receiver
2 x Close range IR emitter wands
1 x Instruction sheetTechnical Specifications
IR inputs: 1
IR outputs: 5 (4 x standard power, 1 x high power)
Power requirement: 12v 500mAh
Dimensions of IRBKIT: L 104mm x W 72mm x D 32mm
Dimensions of IR receiver: L 54mm x W 37mm x D 9mm
Dimensions of emitter: L x 15mm x W 8mm x D 6mmMore kit options
We also offer the IRBKIT with a range of IR receiver options. with Standard receiver plus 1 x High power emitter & 1 x standard emitter (instead of the usual 2 x standard emitters) with fascia mount receiver With black panel mount receiver With white panel mount receiver
b> Optional accessories
We offer a wide range of IR receivers and emitter wands, along with cables and adaptors to allow you to extend the range of the system. Rather than bombard you with a mass of info here, please follow the links below to the different ranges of options. IR receivers IR emitter wands Cables and adaptors
Consider using an IR Emitter Shield
for reliable operationHelpful installation info
IR receiver and emitter connection diagrams
(Acrobat pdf file)