Only for use with the Keene IRBKIT in the "High Power" output socket. Provides a very high output IR signal that will operate equipment up to 10 metres away. If placed inside a cabinet the signal will usually reflect to operate several items of equipment without requiring any other emitters. It can also be used with any other Keene IR Distribution amplifers or the IRBKIT low power socket but will then only perform as a low power emitter. Not suitable for one-to-one operation.
Dimensions of emitter: L x 37mm x W 21mm x D 15mm
Fitted with a 1.2 metre cable. Other IR emitter wand options
We have a range of IR emitter wands to accomodate most requirements. standard emitter wand
with a range of about two metres it can be fixed to the shelf in front of the device to be controlled, or even onto the devices front fascia panel. Medium range emitter wand
with a range of about two metres it is ideal for fixing to the shelf in front of the device to be controlled. Side firing emitter wand
designed to be attached to the front fascia of the device to be controlled. Close range blinking emitter wand
small and discreet, it attaches directly to the fascia of the device to be controlled. Each time an IR signal is emitter the small red LED 'blinks' a confirmation. Dual blinking emitter wand
a twin version of the above and two emitters in one. Ideal where the number of devices to be controlled is larger than the number of emitter 'wand' outputs on the IRBKIT distribution amplifier.
You can also view the IR Receiver and emitter connection diagrams here
(Acrobat pdf file)