Keene Panel Mount Infra Red Receiver (brass)
This is ideal if you want to mount the IR receiver flush in the front panel of a cabinet (or any flat surface provided you can drill a 16mm diameter hole in it!) and have only the front 30mm diameter disc of the receiver showing. The receiver is secured in place with a nut on the rear of the unit and makes for a very neat and tidy mounting solution.
ALL the Keene IR Distribution systems are designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.
It is supplied fitted with a captive 1.2 metre 3.5mm jack cable which gives enough length for most local installations, and can be easily extended by using our range of extension cables (please see the link below).
Dimensions of receiver: L x 80mm (including cable strain relief) x W 30mm x D 30mm
This IR Receiver is designed to work with other Keene manufactured IR distribution systems such as the IRBKIT, IRPRO4, IRBKITM, KIRA, IRC etc.
You can also use this receiver with any other manufacturers equipment by combining it with the Receiver Adaptor
Other IR receiver options
We offer a whole range of IR receiver options to suit your Home Cinema requirements.
Black Panel mount receiver
White Panel mount receiver
Chrome Panel mount receiver
Fascia mounted receiver ideal for fixing to the screen front
Wall plate receiver built into a standard single gang pattress with frosted front plate
Extension cables and adaptors
We recommend that you only use jack cables to extend the range upto 12 metres. If you wish to go further than this we recommend using Cat5 / 6 cable and our KA175 adaptors to do this.
3 metre jack extension cable
5 metre jack extension cable
10 metre jack extension cable
Cat5 / 6 adaptor pair
You can also view the IR Receiver and emitter connection diagrams here (Acrobat pdf file)
|By Type||IR Receiver|
|Product Range||Keene IR|