Marmitek Gigaview 811 Wireless HDMI Kit (3d Compatible)
Instruction sheet (Acrobat pdf file)
Single Room Wireless Full HD + 3D A/V Sender
Replace your HDMI cable wirelessly
Replace your HDMI cable wirelessly and locate your HDTV or projector wherever you want in the same room.
Perfect if you would rather not see cables running across the walls or if you do not want to or cannot drill holes and lay cables.
Mount the receiver (invisibly) behind your HDTV or on the ceiling next to your projector.
Watch every HD device, such as a Blu-ray player, Digital Video Recorder (DVRs) or HD set-top box, wirelessly in the same room.
Turn your PC or Laptop into a Media Centre; watch films, look at photographs, watch internet TV, YouTube or check e-mails wirelessly on your HDTV.
No installation of software is necessary and it is quick and easy to use.
Suitable for Full HD 1080p and all 3D formats.
No loss of image or sound quality as the HD signal is being transmitted without compression.
100% HDCP compliant
1 x Gigaview 811 transmitter
1 x Gigaview 811 receiver
2 x energy saving switch mode power adaptors
1 x HDMI cable 1.5 metre
1 x mini USB cable
1 x Plugs & screws
1 x manual
Supported standards: All 3D formats, Deep colour, HDCP, EDID
3D formats: 1080p at 23.98/24Hz, 720p at 59.94/60/50Hz
Video resolutions: 480p, 576p, 720p, 1080i, 1080p
PC resolution: 1600 x 1200 max.
Audio format digital: up to 6Mbps, AC3 and DTS
HDMI standards: HDCP 2.0, EDID/ E-DCC1.1, CEC
Operating frequency: 5.1 - 5.6GHz
Range: up to 10m line of sight, up to 5m non line of sight
System latency: none (< 1ms)
HDMI input: 1 x 19pin female
HDMI output: 1 x 19pin female
Dimensions transmitter: 30 x 83 x 18mm
Dimensions receiver: 95 x 95 x 32mm
Power supply: 100 - 240VAC/50-60Hz, 5VDC, 1.5A, energy saving
|Info||No loss of image or sound quality as the HD signal is being transmitted|
|•||Suitable for Full HD 1080p and all 3D formats|
|•||No installation of software is necessary and it is quick and easy to use|
|•||2 year warranty|
1) Data Sheet (PDF)