Marmitek IR Control 11 XTRA

£127.45 Price (Inc VAT)
Dispatched today! (Order by 3pm)



Panel Mount High-end Blaster Infrared Extender
Operate your A/V equipment which is out of sight
Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
The small built-in IR receiver can be fully integrated in your A/V cabinet so the entire set can be placed out of sight.
With IR blaster function for operating numerous devices with one IR blaster or if you prefer not to stick IR LEDs onto your A/V equipment.
Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs.

How does the IR Control 10 XTRA work?
Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room. The IR receiver must be installed in view of your own remote control. Stick the IR blaster LED wherever you want in the cabinet and conceals the IR main module neatly. Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

Kit Contents
1 x IR Module
1 x IR Receiver
2 x IR Extension cable with one IR blaster LED
1 x IR Extension cable with two IR emitter LEDs
1 x AVR connection cable
1 x Power adaptor
1 x Manual

IR receiver
Frequency range: 30-60 KHz
IR reception range: +/- 10 metres
IR reception angle: 90 (+45/-45 from centre)
Cable length: 3 metres, extendable up to 300 metres
IR reception indication: YES, purple indication LED
Status indication: YES, green indication LED
Receiver dimensions: 40 x 13 x 11mm

IR module
Power supply POWER: 100-240VAC 50/60Hz, 12VDC 200mA (supplied)
Power supply STATUS: 5-24VDC / 5-12VAC plug, - 5.5mm outside / +
2.1mm inside (not supplied)
IR input: 1x 3.5mm jack connector, for standard IR receiver
1x screw connector, for up to 6 in parallel
connected IR receivers. Extendable up to 300
metres using CAT5 (or equivalent)
IR output: 4x 3.5mm jack plug (mono), switchable for IR
extension cables with emitter or blaster LEDs
Dimensions: 95 x 46 x 20mm
IR extension cable with 1 blaster LED
Connection: 3.5mm jack plug (mono)
IR LEDs: 1x IR blaster LED
Cable length: 3 metres
IR extension cable with 2 emitter LEDs
Connection: 3.5mm jack plug (mono)
IR LEDs: 2x IR emitter LEDs
Cable length: 3 metres

More Information
Weight (kg) 0.550000
Manufacturer Marmitek
By Type IR
Warranty 1 year
MSRP £106.21