Want to connect your Ultra HD television to a TV decoder located elsewhere in your home, at any location you want? It's simple with the products from the Marmitek MegaView series. Introducing the Marmitek MegaView 141 UHD and the MegaView 241 UHD 2.0, both can support the latest Ultra HD 4K60 resolution. These products offer the optimal solution if you do not want to or can't use a long HDMI cable, while still maintaining the highest possible image quality.
4K60 extension to up to 40 metres
By default, all products in the Marmitek MegaView range consist of one HDMI transmitter and one HDMI receiver. The MegaView 141 UHD enables you to use 1 CAT 5e/6 cable to extend the 4K60 signal from a TV decoder or other HDMI source for up to 40 metres to a TV at a desired location in the house.
You can operate your connected source device remotely using the infrared return function or CEC (Consumer Electronics Control). Allowing you, for example, control of the downstairs living room TV decoder from your bedroom.
Power over Cable
Thanks to the built-in Power over Cable (PoC) technology, a separate power connection for the MegaView receiver at the TV is no longer necessary, allowing you to neatly and discretely hide away your Megaview receiver.
PLEASE NOTE: The MegaView 141 does not offer 18Gbps (therefore it cannot do 4K 60 @ 4:4:4), if you need this take a look at the MegaView 241 UHD 2.0 Extender.
|By Type||Video Extender Kit|
|Supported Video Resolution||4K 60Hz 4:2:0|
|Maximum Video Inputs||1|
|Maximum Video Outputs||1|
|Supported Audio Formats||Dolby TrueHD 5.1|
|HDMI Version||HDMI® 2.0 (a/b)|