PureTools PT-IPAV-E2-RX - HDMI to IP Extender Receiver
This PureTools AV over IP receiver converts IP-based Ethernet signals into AV signals. This is the receiver unit is a supplement to the PT-IPAV-E2-TX Transmitter. To power the PT-IPAV-E2 Extender Set, separate power supplies or Power-over-Ethernet (PoE) can be used.
The PureTools PT-IPAV-E2 offers four display modes: one-to-one, one-to-many, many-to-one and many-to-many, offering a choice of 16 pre-programmed channels. Additional channels can be added as required. An almost unlimited number of transmitters or receivers can be integrated into each channel.
With the PT-IPAV-E2, AV resolutions up to FullHD / 1080p@60Hz can be transmitted over a distance of 120m via Cat.5e or Cat.6 with an average of 15Mbps - The codec used is H.264.
The receiver has an integrated RS232 interface, which can be bi-directionally controlled from both sides. There is also a push button switch for channel selection, including a digital display on the front of the unit - for easy access in difficult installations. The built-in IR forwarding function allows control of a connected device from a remote location - Optimal when the IR signal is to be sent back to the source device against the AV signal direction.
|By Type||Video Receiver|
|Supported Video Resolution||1080p|
|Audio Input Types||N/A|
|Maximum Video Inputs||1|
|Audio Output Types||N/A|
|Maximum Video Outputs||1|
|Supported Audio Formats||LPCM 5.1|
|HDMI Version||HDMI® 1.4|