Keene IR Distribution Extender Complete Kit Including Fascia Mount IR Receiver
IR control problems are becoming more common as it is often desirable to hide AV equipment away in cabinets or other rooms, often a distance from the TV or projector. The IRBKIT system makes it easy to relay those important IR signals back to where they are needed.
The IRBKIT system is designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.
IRBKIT WITH FASCIA MOUNT IR RECEIVER
This page that you are on now shows our IRBKIT distribution amplfier with our really popular Fascia mount IR receiver. This is ideal if you have a black fascia screen and would like a discreet solution to attach to the front (it only measures 34mm long x 15mm wide x 9mm deep). The Fascia mount IR receiver attaches by small sticky pads and has a small green LED which flashes to show that it has received your remote control's command. A handy cable clip is also supplied to hold the receiver's cable out of the way behind the screen.
The IR receiver cable is 2.5 metres long and so fine for most local installations. This cable can be easily extended if needed with our range of extension cables, please follow the 'cables and adaptors' link below for our options.
* Please note, the standard IR output can even be used as a direct IR input to some amps or preamps (such as certain Onkyo models) via their IR input port using a 3.5mm to 3.5mm male to male jack cable. This can be used as an alternative to having an IR transmitter in front of the amp or preamp's IR window in certain circumstances, please ask if you're unsure.
If you require more than one IR receiver input then we recommend the IR Pro Kit 4 or the IR Commander
1 x IRBKIT IR distribution amplifier
1 x PSU with 3 pin UK plug
1 x Fascia mount IR receiver fitted with a captive 2.5 metre cable
2 x Close range IR emitter wands
1 x Instruction sheet
IR inputs: 1
IR outputs: 5 (4 x standard power, 1 x high power)
Power requirement: 12v 500mAh
Dimensions of IRBKIT: L 104mm x W 72mm x D 32mm
Dimensions of IR receiver: L 34mm x W 15mm x D 9mm
Dimensions of emitter: L x 15mm x W 8mm x D 6mm.
More kit options
We also offer the IRBKIT with a range of IR receiver options.
with Standard receiver
With black panel mount receiver
With white panel mount receiver
We offer a wide range of IR receivers and emitter wands, along with cables and adaptors to allow you to extend the range of the system. Rather than bombard you with a mass of info here, please follow the links below to the different ranges of options.
IR emitter wands
Cables and adaptors
Helpful installation info
IR receivers and Emitter connection diagrams (Acrobat pdf file)
|Product Brand||Keene Electronics|
|Info||Control your AV kit when out of sight (inside cupboard/in another room)|
|•||Works with virtually any original remote control for AV devices with infrared.|
|•||Works with BT Vision and YouView. (not many other repeater kits do)|
|•||Extra emitters and cat5 adapters are also available|